Removing The Mezzanine Connector Cover; Installing The Mezzanine Card - HP StorageWorks All-in-One SB600c Storage Blade Solution User Manual

• Install Type II mezzanine cards only on mezzanine 2 connector.
To install the component:
1.
Power down the server blade.
See 19 for more information.
2.
Remove the server blade.
See Removing the HP AiO SB600c Server Blade
3.
Remove the access panel. See
4.
Remove the mezzanine connector cover.
Figure 6 Removing the mezzanine connector cover
5.
Install the mezzanine card. Press down on the connector to seat the board.
Figure 7 Installing the mezzanine card.
6. Install the access panel. See
32
Hardware Options installation and cabling
on page 20 for more information.
Removing the access panel
Installing the access panel
on page 21 for more information.
on page 22