We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
BLUETOOTH PAIRING
Take earbuds out of case and remove stickers.
1
Place back in case and close door.
Red light on case indicates charge.
2
Remove earbuds from case.
One earbud will blink blue/white indicating
3
ready to pair to your device.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
support@jlab.com
Reach out to us at
jlab.com/contact
or visit
REGISTER TODAY
Product updates
Select "JLab GO Air Sport" in your device's
4
Bluetooth settings to connect.
Voice prompt "Bluetooth connected" followed by
blinking white lights will indicate you are connected.
Settings
Bluetooth
JLab GO Air Sport
ADDING NEW
/
ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected
device. Turn ON Bluetooth from new device.
Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing.
Select "JLab GO Air Sport" in device settings to connect.
jlab.com/register
|
How-to tips
FAQs & more
Need help?
Do you have a question about the GO AIR SPORT and is the answer not in the manual?
Questions and answers