Advertisement
2
Top
Bottom
3
1
Place the device into the back of the case
body. Ensure the device is properly aligned
inside of the case back. If misaligned,
remove and try again. Press the front frame
of the case body over the front face of the
device. Small locking tabs on the front and
back case will begin to engage.
Press firmly around all edges of the front
frame to engage the locking tabs. When
pressing each edge into a locked position,
follow the sequence as illustrated here. Do
not use tools or attempt to force the
installation process.
1. Start at the bottom and move left.
2. Continue around the top edge.
3. Complete installation by securing the
right edge.
(Reverse this process for removing the
device.)
7.
Advertisement
