Advertisement
Microphone Blocker:
3) Insert the PA-MA-1 into the audio jack of the device.
4)Remove the PA-MB-1 to restore microphone
function. This may require first removing the protective
case depanding on device type and case.
Security Stickers:
2
Top
Bottom
Installing PA-MB-1 Microphone Blocker 3.5mm
1)The PA-MB-1 fits only standard 3.5mm headphone jacks.
2) Remove the audio block from the case.
Installing PA-SS-1104 Security Stickers
If the sliding camera blockers are not compatible with
device or case, use PA-SS-1104 Security Stickers.
1
3
Removing Device
Beginning with the bottom edge near the charging
port, press firmly using your thumbs to disengage
the case seal. Continue carefully pressing around the
edges of the case to release the device in the order
shown. Do not attempt to pry or force the device
from the case.
1. Start at the bottom and move left
2. Continue around the top edge
3. Release the right edge to remove device
5.
Advertisement
