Related Manuals for Pivot PA-SK-1
Summary of Contents for Pivot PA-SK-1
- Page 1 SECURITY KIT PA-SK-1 | Quick Introduction For Use With Compatible PIVOT Cases [Issued 2021.04.06]...
-
Page 2: Read Before Use
The PIVOT Security Kit mitigates security concerns and minimizes the potential for classified information compromised though the device cameras or microphone. The PIVOT Security Kit includes sliding covers for the front and rear cameras. The kit includes optional stickers than can be placed over the the front camera. -
Page 3: Device Compatibility
Camera Blocker 3.5mm Camera Blocker Device Compatibility Large Sliding Camera Cover: Compatible with all PIVOT Cases that do NOT use a front frame/bezel (e.g. PIVOT Mini Cases). Rear Camera: Sliding Cover compatible with iPad models with a single rear facing camera. - Page 4 PA-CB-1 Small Sliding Camera Blockers STEP 1: Clean camera surface and surrounding using manufacturer’s recommended methods. STEP 2: Check for fit/compatibility with device and PIVOT case before final application. STEP 3: Remove PA-CB-1 adhesive backing, align the hole on the sliding camera blocker with device camera and lightly place blocker into position.
- Page 5 PA-CB-2 Large Sliding Camera Blockers STEP 1: Clean camera surface and surrounding using manufacturer’s recommended methods. STEP 2: Check for fit/compatibility with device and PIVOT case before final application. STEP 3: Remove PA-CB-2 adhesive backing, align the hole on the sliding camera blocker with device camera and lightly place blocker into position.
- Page 6 PA-MB-2 Microphone Blockers, 3.5mm STEP 1: The PA-MB-1 fits only standard 3.5mm headphone jacks. STEP 2: Remove the audio block from the case. STEP 3: Insert the PA-MA-1 into the audio jack of the device. STEP 4: Remove the PA-MB-1 to restore microphone function. This may require first removing the protective case depanding on device type and case.
- Page 7 PA-SS-1104 Security Sticker If the sliding camera blockers are not compatible with device or case, use PA-SS-1104 Security Stickers. STEP 1: Removing Device Beginning with the bottom edge near the charging port, press firmly using your thumbs to disengage the case seal. Continue carefully pressing around the edges of the case to release the device in the order shown.
-
Page 8: Additional Information
When pressing each edge into a locked position. Additional Information To learn more about PIVOT cases, mounts and accessories, please visit pivotcase.com for instructional videos, product support and information about other PIVOT solutions. You’ll find valuable online resources provided to enhance your user experience and see the complete line of PIVOT products. - Page 9 Thank you. Learn more at: PIVOTCASE.COM PIVOT SUPPORT If you have questions please contact PIVOT Support. www.pivotca se .com/sup p o r t sal es@ pi votc as e. com #EFBMADESIMPLE 1-888-4-FLYBOYS (1-888-435-9269) @PIVOTCASE www.youtube.com/c/pivotcasevideo TM and © 2020 FlyBoys. All rights reserved.