Table of Contents
Related Manuals for CUBE in-a-box V2.series
Summary of Contents for CUBE in-a-box V2.series
- Page 1 CUBE in-a-box V2.series Detailed Assembly Instructions Tools needed: 1 screwdriver (or drill), Philips head Time of assembly: 20-30 minutes with 2 people For help call our Toll Free Customer Service at: 1-888-880 CUBE (2823)
- Page 3 - 1 - Cube in-a-Box – V2.series – Assembly Instructions Unpack all the parts, double check quantities with the packing list. If there is a problem with the count, call our Customer Service at 1-888-880-2823 (Pacific Time) or email at infosales@cubeinabox.com...
- Page 4 - 2 - Slide rail-panel 5** (hooks facing up) on top of frame 4. **TIP: rail-panel 5 must be installed hooks facing up so paper/pencil trays can hold. Assemble the 2 wire-guides and slide/adjust them into posts where you will need them, preferably under work top level.
- Page 5 - 3 - Place the raceway cover on top of the plastic cavaliers on each side of the panel. To close the raceway cover, push down on each side of the cover until it clips in. Slide/adjust shelf supports into posts B at the height of your choice.
- Page 6 - 4 - Place the 2 paper trays and the pencil box wherever you want them, inside or outside the cubicle. You are done, enjoy your workstation!! Tell your friends about us!
Need help?
Do you have a question about the V2.series and is the answer not in the manual?
Questions and answers