Using The Lamp - BenQ PL19_D User Manual

3. Connect the power cord of the lamp to the power adapter (as shown by
plug it into a power outlet (as shown by
Upon receiving power from the power outlet, the lamp's warm-up process will start
automatically and will take approximately 5 seconds. Please DO NOT turn off the lamp during
the warm-up process. You can start using the lamp when the process is complete.

Using the Lamp

Turning on/off the Lamp and Entering Auto Dimmer Mode
• Do not block the light sensor on the lamp. Otherwise the Auto
Dimmer Mode will not function properly.
• If the Auto Dimmer Mode is turned on, the lamp will monitor the
ambient lighting condition and dynamically adjust the brightness
setting.
• The Auto Dimmer Mode will exit automatically when you manually
adjust brightness or color temperature.
Manually Adjusting Brightness and Color Temperature
If power supply to the lamp is interrupted unexpectedly, the lamp will resume the last used
brightness and color temperature settings upon the recovery of power supply.
2 English
in the figure).
Turning on/off the Lamp
To turn on the lamp, touch the Power
lamp, touch the Power
Entering Auto Dimmer Mode
To enter Auto Dimmer Mode, touch the Auto Dimmer Mode
button when the lamp is on. The Auto Dimmer Mode
light up. The Auto Dimmer Mode automatically adjusts the lamp's
brightness according to the ambient lighting condition.
Adjusting Brightness
When the lamp is on, touch the
or the button to decrease it. You can select from 15 brightness
levels.
Adjusting Color Temperature
When the lamp is on, touch the
button for blueish light. You can select from 6 color temperature
settings: 5000K, 4500K (neutral white), 4000K, 3500K (warm
white), 3000K and 2700K (soft white).
button. To turn off the
button again.
Light sensor
button to increase brightness,
button for yellowish, or the
in the figure) and
button will