Ad-c series 203 mm (8") 2-way coax baffle assembly pre-install enclosure for ad-c820 203 mm (8") 2-way coax blind-mount split ring and tile rails for ad-c821 round grille for 8" loudspeaker square grille for 8" loudspeaker 304 mm (12") 2-way coax baffle a (24 pages)
Page 2
QSC authorized service station or an authorized QSC international distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
Page 3
The QSC Q-SYS NL-P4 is in compliance with European Directive 201 1/65/EU – Restriction of Hazardous Substances (RoHS2). The QSC Q-SYS NL-P4 is in compliance with “China RoHS” directives per GB/T 26572. The following chart is provided for product use in...
Page 4
What’s in the Box (1x) (1x) (1x) (2x) NL-P4 Snap-fit Protective Quick- magnetic cover link cable grille assemblies* (2x) (1x) (1x) Slip-lock Warranty Safety fasteners statement information *Length 3.25m/128in, 2mm thickness Connections and Controls • LAN/PoE: RJ-45 connector for Q-SYS Gigabit Ethernet and Power over Ethernet (PoE). Cat5e cabling or better required. PoE+ Type 2 Class 4 capable.
Page 5
Installation Suspend the Loudspeaker Structural member WARNING!: Do not attach the snap hook to the loudspeaker or any other load until the hanger cable has been anchored to a suitable structural member. 1. Insert the wire cable into the appropriate hole in the fastener Insert cable (see Figure 2).
Page 6
Wire the Loudspeakers Refer to Figure 6. 1. On the top of the enclosure, remove the protective cover for the input connector. 2. Pass the unterminated CAT cable through the protective cover and terminate with an RJ45 connector. Plug the RJ45 connector securely into the jack.
Need help?
Do you have a question about the Q-SYS NL-P4 and is the answer not in the manual?
Questions and answers