Advertisement
K12 YOKE
K Series Loudspeaker Accessory
User Manual
Yoke spacer — 2 components
M5 x 25 mm screw with thread locking patch — 4 components
Steel yoke bracket – side 1 — 1 component
Steel yoke bracket – side 2 — 1 component
Steel yoke bracket – center extension — 1 component
M6 x 16 mm screw — 6 components
M6 flat washer — 6 components
M6 self-locking nut — 6 components
M8 x 25 mm screw — 2 components
M8 split lock washer — 2 components
M8 flat washer — 2 components
This yoke mount is specifically for mounting the QSC K12 loudspeaker to a structural support element (lighting or soundstage truss or other load
bearing truss, etc.). It is not to be used as a wall mount or other attachment to non-load rated structure.
IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS
Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, enclosures, transducers, brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the
strength of the installation or placement. Any such condition severely reduces the safety of the installation and should be immediately
corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected
overloading. Never exceed the rating of the hardware or equipment.
Consult a licensed, Professional Engineer regarding physical equipment installation. All local, state and national regulations regarding the
safety and operation of equipment are understood and adhered to.
Do not use this yoke bracket to attach the K12 to a wall or other architectural element!
•
•
Attach the base of this yoke bracket to the load-bearing structure using appropriate load-rated hardware approved for the application.
•
Install in accordance with instructions by QSC Audio Products, LLC instructions and under the supervision of a licensed Professional Engineer.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and
maintenance (servicing) instructions in this manual.
© 2009 QSC Audio Products, LLC. All Rights Reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in
the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
All manuals and user guides at all-guides.com
WARNING!
Patents may apply or be pending.
TD-000291-00-A
*TD-000291-00*
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for QSC K Series
Summary of Contents for QSC K Series
- Page 1 M8 flat washer — 2 components This yoke mount is specifically for mounting the QSC K12 loudspeaker to a structural support element (lighting or soundstage truss or other load bearing truss, etc.). It is not to be used as a wall mount or other attachment to non-load rated structure.
- Page 2 All manuals and user guides at all-guides.com Attaching the Yoke to the Loudspeaker: Horizontal Mounting The yoke bracket is designed to attach to the rigging points on the loudspeaker for either horizontal or vertical suspension. Attach the yoke spacers using the included M5 screws in the locations shown in (Figure 1).
Need help?
Do you have a question about the K Series and is the answer not in the manual?
Questions and answers