Rear Panel; Network Cable Connector; Usb Port Connector; Parallel Port Connector - D-Link DP-300U User Manual

Rear Panel

DC Power
Connector

Network Cable Connector

The Print Server's rear panel features an RJ-45 connector for connection to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should
be Category 5 twisted-pair cable). The port supports the NWay protocol, allowing
the Print Server to automatically detect or negotiate the transmission speed of the
network.

USB Port Connector

The rear panel of the print server features the USB port connector. Plug this
connector directly into the USB port on your network printer via a USB cable.

Parallel Port Connector

The rear panel of the print server features two parallel port connectors. Connect this
port to the parallel port on your network printer with a parallel cable.

DC Power Connector

The DC power input connector is located on the Print Server's rear panel and is
labeled DC 5V.
Parallel Port
Connector
4
USB Port
Connector
Network Cable
Connector