Rear Panel Connectors; Network Cable Connector; Reset Button; Dc Power Connector - D-Link DPR-1061 Quick Installation Manual

Hide thumbs Also See for DPR-1061:

Table of Contents

Available languages

Rear Panel Connectors

The Print Server's rear panel feature an RJ-45 connector for connection to 10Base-T

Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5

twisted-pair cable). The port supports the NWay protocol, allowing the Print Server to

automatically detect or negotiate the transmission speed of the network.

Press and release this button to reset the MFP Server; or press and hold this button for

three seconds until the USB1, USB2, and LPT LEDs on the front panel light up and then

release the button, The MFP Server will then resume the default factory settings.

The DC power input connector is located on the Print Server's rear panel and is labeled

DC 5V.

Table of Contents