Download Print this page

Installation Instructions; Flow Diagram - Hans Grohe Raindance S 300 Air 1jet 27493007 Instructions For Use/Assembly Instructions

Advertisement

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
The product may only be used for bathing, hygienic
and body cleaning purposes.
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the influ-
ence of alcohol or drugs are prohibited from using
this product.
Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points.
• The mesh washer must be insert to protect the over-
head shower against incoming dirt by pipework. In-
coming dirt leads to defects or/and can damage parts
of the shower; such caused faults voids all liability and
guarantee claims.
English
Technical Data
Operating pressure:
26460007, 26460097, 26484007,
26484097, 27493007, 27494007
Recommended operating pressure:
26607007, 26611007
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!
Symbol description
Ceiling mount see page 3
Wall mount see page 3
Do not use silicone containing acetic acid!
Dimensions (see page 10)

Flow diagram

(see page 10)
Spare parts (see page 13)
Operation (see page 20)
To empty the overhead shower after use,
hold it in a slightly inclined position.
Cleaning (see page 16)
max. 1 MPa
0,15 - 0,5 MPa
0,2 - 0,5 MPa
max. 60°C
max. 70°C / 4 min
3

Advertisement

loading