Performing A Factory Reset - D-Link DI-804 User Manual

again. Games send out many requests to many different servers trying
to find the best game server for your connection. When this is done, the
NAT table used in the Broadband Router can fill up and stop working
temporarily. Try using the DMZ host feature while connecting to game
servers and then disabling DMZ while playing the game.
§ Turn the Broadband Router off and then on again to reset the NAT
table.
§ Make sure that the correct ports have been opened in order for your
specific game to operate correctly behind a firewall. Consult your game
documentation or contact technical support for your game to obtain the
correct settings for your game.
§ Some games just won't operate correctly behind a firewall. In this case,
use the DMZ host feature while using the game, then turning DMZ off
while the game is not being played to ensure proper firewall protection.
My E-Mail program doesn't receive my E-Mail
Cause:
§ The Domain Suffix is not set correctly.
Resolution:
§ Some email applications require you to enter the Domain Suffix when
you configure your network and TCP/IP settings. The Domain Suffix is
the unique identifier for your email server.
§ The Domain Suffix is the Internet Protocol (TCP/IP) address of the
email server you are using. Your cable modem or DSL provider usually
lists it somewhere on your invoice. The Domain Suffix address should
appear similar to this: dlink.occa.home.com. Find the Domain Suffix
on your invoice or call your Internet Service Provider (ISP) to obtain it.

Performing a Factory Reset

Follow these steps to perform a Factory Reset using the Reset button
on the back of the DI-804.
1. Press and hold the Reset button with a pen or paper clip for 3
seconds.
44