D-Link DI-804 User Manual page 12

Factory Reset button. Refer to the following table for the meaning of each
feature.
Power
Used to connect to the power outlet. Only use the power adapter
provided with the DI-804
WAN
The RJ-45 Ethernet port labeled WAN is used to connect your
DI-804 to your DSL or Cable modem.
Console
Port used to connect an external analog backup modem.
Reset
Resets the configuration to default settings.
LAN
The RJ-45 Ethernet port used to connect your hub, switch, or
PC using Ethernet cables to your DI-804.
Uplink/
Used to change the operation of Port #1. If uplink is selected,
Normal
Port 1 should be connected to a hub or switch. Use the Normal
setting to connect to a client PC.
12