Table of Contents
Advertisement
USE
If the child lock is activated with no timer function engaged (only clock is
displayed), then the oven will not operate.
If the child lock is activated after a timer function has been set, then the oven
will operate normally; however, it will not be possible to change the settings.
When the child lock is activated, systems (cooking modes) or additional
functions cannot be changed. The only possible change is to end the cooking
process by rotating the selector knob to »0«.
Child lock will remain active after the oven is switched off. To select a new
system, the child lock must first be deactivated.
Oven lighting
Oven lighting is switched on automatically when the door is opened or when the
oven is switched on.
After the end of the cooking process, the light will remain on for another minute.
The light inside the oven can be switched on or off by pressing the LIGHT key.
Acoustic signal
5sek
Loudness of the acoustic signal can be set when no timer function is activated
(only the time of day is displayed).
Press the TEMPERATURE/POWER key and hold it for 5 seconds. Two fully lit
bars will appear on the display. Rotate the SETTINGS KNOB (-/+) to choose
one of the three volume levels (one, two, or three bars). After three seconds, the
setting will be automatically stored and the time of day will appear.
Decreasing the display contrast
5sek
The cooking system selector knob should be on the »0« position.
Press the LIGHT key and hold it for 5 seconds. Two fully lit bars will appear on
the display. Rotate the SETTINGS KNOB (-/+) to adjust the display dimmer (one,
two, or three bars). After three seconds, the setting will be automatically saved.
Standby
+
Display lighting can be automatically switched off after 10 minutes if it is not
used.
Press the KEY + TIMER keys to switch off the display. If a timer function has
been activated, then »OFF« and the TIMER icon will appear on the display to
indicate the activated function.
After a power outage or after the appliance is switched off, the additional function
settings will remain stored for no more than a few minutes. Then, all settings, except for
the acoustic signal and child lock will be reset to factory defaults.
EN 19
Advertisement
Table of Contents
