Maintenance And Specifications - Curtis Mathes CMC 19101 Owner's Manual

MAINTENANCE AND SPECIFICATIONS

Servicing
Should your TV/VCR Combination stop working, do not try to repair it yourself. There are no
user-serviceable parts inside the unit. Turn the TV/VCR Combination off, unplug the power
cord, and take the unit to an authorized CurtisMathes repair center.
Cabinet Cleaning
To clean your TV/VCR Combination, wipe it with a soft cloth that has been dampened with
luke-warm water and wrung dry. Never use a solvent or alcohol. Never spray insecticides near
your TV/VCR Combination; such chemicals can cause damage and discoloration to the exteri-
or of your TV/VCR Combination.
Video Head Cleaning
If the picture is blurred or interrupted when palying back a tape, it may be caused by dirty
video heads. Video heads can become dirty after long periods of playback, or from repeated
use of rental tepes. To have your video heads cleaned, contact an authorized CurtisMathes
repair center.
Specifications
Power Supply
Power Consumption
Dimensions (WxHxD)
Weight
Channel Coverage
Video Signal System
Picture Tube
Antenna Input
VCR Format
Tape Speed
Playback Time
Speaker Output
Video Input
Audio Input
Temperature
Humidity
Timer Programming
Tuning System
Design and specifications are subject to changes without notice or legal obligaiton.
AC 120V, 60Hz
60W
382 x 404 x 365mm
14Kg
VHF : 2-13, CATV : 1, 14-125 ; UHF : 14-69
NTSC Color
19" diagonal
VHF/UHF 75ohm, one input
VHS Standard
SP : 33.35mm/sec ; LP : 16.67mm/sec ; EP :
11.12mm/sec
SP : 120min ; LP:240min; EP:360min
(T-120 tape)
8 Ohm, 1.3W
1.0Vpp, 75 Ohm
3.8dBm, over 100K Ohm
5˚C to 40˚C
Less than 85%
6 Event / 1 Month
Frequency Synthesized Tuning
Maintenance and Specifications
43