Chapter 1 : Overview Of Your Equipment; Your Tv/Vcr Combination's Front Panel - Curtis Mathes CMC 19101 Owner's Manual

C H A P T E R
Overview of Your Equipment
Your TV/VCR Combination's comes with a remote control. The section below summarizes
the buttons, controls, and terminals that you will use with your TV/VCR Combination.

Your TV/VCR Combination's Front Panel

Below you will find short description of the buttons and indicators on the front panel. These
are used for the following functions:
VIDEO
1
1 VIDEO in jack
Use this jack to receive a video signal from another A/V component.
2 AUDIO in jack
Use this jack to receive a audio signal from another A/V component.
3 EAR PHONE jack
Use this jack to the earphone (not supplied). The sound from the speaker is turned off.
4 Remote control receiver
This receiver receives a signal from your remote control. Do not block it.
5 STAND-BY(red) indicator
This indicator lights up when the power is off.
6 REC (red/green) indicator
This indicator lights up red when recording and lights up green when timer program oper-
ating.
7 REC button
Press this button to begin recording. Press repeatedly to set a recording time using
One-Touch Recording (OTR).
8 REW button
Press this button to rewind the tape.
9 PLAY button
Press this button to begin normal playback of the tape
10 FF button (Fast Forward)
Press this button to fast forward the tape.
4

Chapter 1 : Overview of Your Equipment

1
5
EAR PHONE
AUDIO
STAND-BY
2 3 4
REW PLAY
REC
REC
6 7 8 9
12 13
FF STOP/EJECT
VOL CH
12 13
10 11
POWER
14