Displaying The Tape Counter - Curtis Mathes CMC 19101 Owner's Manual

Displaying the Tape Counter

Press the RECALL button to display the tape counter. The tape counter shows the tape travel
time in hours, minutes and seconds during recording or playback. Each time you press the
RECALL button, the time counter and the remaining tape time counter appears alternately.
12:08 PM
Stop
When you use a tape shorter than 120 minutes, set Tape Remain to T120. When you use a
tape longer than 120 minutes, set Tape Remain to Others.
1. Press the MENU button until "Tape" menu is displayed.
2. The "Tape Remain" item will be selected.
Press the VOLB button to select "T120" or "Others".
3. Press the MENU button until OSD menu disappears.
1
Tape
Tape Remain : T120
Repeat Play : Off
Rental Tape : Off
Zero Stop
Select
38
Chapter 7 : Additional VCR Features
Channel 10
SP 0:30:00
Time counter
2
Tape
Tape Remain : Others
Repeat Play : Off
Rental Tape : Off
Zero Stop
Adjust Next Select
12:08 PM
Stop
Remaining tape time counter
3
Adjust Next
Channel 10
SP REM 01:30