Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BERGHOF B-PRIMIS ET-PRO Series
Summary of Contents for BERGHOF B-PRIMIS ET-PRO Series
- Page 1 USER HANDBOOK 1.0 B-PRIMIS ET-PRO series...
- Page 2 This equipment handbook is only complete in conjunction with the product-related hardware and soft- ware manuals required for the specific application. You can contact us at: Berghof Automation GmbH Arbachtalstrasse 26 72800 Eningen Germany T +49.7121.894-0 F +49.7121.894-100 Email: controls@berghof.com www.berghof-automation.com Berghof Automation GmbH is certified to DIN EN ISO 9001:2015.
- Page 3 USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES Revision log Version Date Description 26/09/2019 Initial version 24/04/2020 Catalogue numbers 18/06/2020 Formatting revised in the document Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 4: Table Of Contents
4.1.3. ET-Pro 7 dimensions .......................... 20 4.1.4. ET-Pro 7 installation cut-out ....................... 21 4.1.5. ET-Pro 10 dimensions ........................22 4.1.6. ET-Pro 10 installation cut-out ......................23 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 5 TECHNICAL DATA ..........................52 9.1. Type plate ............................55 9.2. Device variants and identification ....................56 9.3. Options and extensions ........................56 STANDARDS AND CERTIFICATES ....................57 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
- Page 6 Customer services ........................... 59 11.2. Addresses ............................59 APPENDIX ............................60 12.1. Notes on copyright and the software licence ................60 12.2. List of figures............................ 60 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 7: General Information
Individual instruction or list of instructions which can be carried out in any order. … List of instructions which must be carried out in the order given. … Additional product information Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 8: Hazard Categories And Indications
Failure to observe the safety measures may result in minor injuries. Take preventive measures. NOTICE Possible damage to property Failure to observe the safety measures may result in damage to property. Take preventive measures. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 9: Qualified Personnel
→ The user is responsible for coordinating the use of the safety-related control components with the responsible authority and for adhering to its specifications. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 10: Intended Use
During installation, make sure that the existing seal profiles are undamaged. For operation, refer to the applicable ambient conditions (see “Technical data”). Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 11: Transport And Storage
If you notice any damage in transport or the contents do not match the order: inform the suppliers immediately. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 12: Safety
Disconnect the device from the system. Do not open the device housing. If it is necessary to work on internal parts of the device, contact the manufacturer (see “Addresses”). Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 13: Product Description
USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES Product description The operating panels of the B-Primis ET-Pro series are first-class display and input devices with high- quality frames in analogue-resistive technology, which are connected to a control system for machines or plants via Ethernet interfaces. The terminal shows CODESYS Web visualisation or CODESYS Tar- get visualisation, irrespective of whether the visualisation originates from a Berghof PLC control unit or another compatible CODESYS control unit. -
Page 14: Overview
Twist-lock catch (4 pcs) Ethernet (ETH0) No function Debug interface LEDs: PWR, Run/Stop, Error µSD microSD card connection (for future applications) Only required for protection rating IP65 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 15: Primis Et-Pro 7
Twist-lock catch (6 pcs) Ethernet (ETH0) No function Debug interface LEDs: PWR, Run/Stop, Error µSD microSD card connection (for future applications) Only required for protection rating IP65 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 16: B-Primis Et-Pro 10/15
3.2. Scope of delivery and accessories Scope of delivery → B-Primis ET-Pro device Accessories The following accessories are available as options H001 or separately via the order number. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 17: Product Features
User program and data memory (RAM): 512 MB onboard → User program memory (flash) 512 MB onboard → 1 USB host interface (USB 2.0) → 1 Ethernet 10/100 Base T interface Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 18: Assembly
Make sure that the mounting points of the device are all in a common plane, with no more than maxi- mum ±0.5 mm variation. 4.1.1. ET-Pro 4 dimensions Fig. 4: ET-Pro 4 dimensions Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 19: Pro 4 Installation Cut-Out
Max. corner radius: 3.0 mm Optimum thickness of support material: Protection rating IP65 with twist-lock catches: only at 1.5–3.0 mm Optimum: 1.5–2.0 mm Max. 3.0 mm Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 20: Pro 7 Dimensions
USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES 4.1.3. ET-Pro 7 dimensions Fig. 6: ET-Pro 7 dimensions Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 21: Pro 7 Installation Cut-Out
Max. corner radius: 3.0 mm Optimum thickness of support material: Protection rating IP65 with twist-lock catches: only at 1.5–3.0 mm Optimum: 1.5–2.0 mm Max. 3.0 mm Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 22: Pro 10 Dimensions
USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES 4.1.5. ET-Pro 10 dimensions Fig. 8: ET-Pro 10 dimensions Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 23: Pro 10 Installation Cut-Out
Max. corner radius: 3.0 mm Optimum thickness of support material: Protection rating IP65 with additional tensioning clamps: only at 1.5–3.0 mm Optimum: 1.5–3.0 mm Max. 4.0 mm Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 24: Pro 15 Dimensions
USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES 4.1.7. ET-Pro 15 dimensions Fig. 10: ET-Pro 15 dimensions Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 25: Pro 15 Installation Cut-Out
Cut a rectangular installation cut-out in the support material: Height: 260 mm Width: 402 mm Max. corner radius: 3.0 mm Optimum thickness of support material: Optimum: 2.0–3.0 mm Max. 4.0 mm Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 26: Installation
Fig. 13: Installation in an installation cut-out, example with 4 fastening clips 2nd Making sure the alignment is correct, push the device evenly into the installation cut-out until the 2 or 3 fastening clips snap into place. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 27 Device with twist-lock catches: Use a T9x50 screwdriver to tighten the twist-lock catches to a maximum of 0.4 Nm. The protection rating IP65 on the front face is only achieved when the twist-lock catches are used correctly. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 28: Pro 10 Installation
The tensioning clamps are not attached to the device. Making sure the alignment is correct, push the device evenly into the installation cut-out. 2nd Make sure that the device is lying flush all round. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 29 If the device is mounted carelessly, it may fall out of the installation cut-out or get damaged. Do not tilt the device. Secure the device against falling down until the tensioning clamps are attached. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 30: Pro 15 Installation
Fig. 19: Hooking in the tensioning clamps (at the rear) Attach the device with 2 tensioning clamps: Hook in the tensioning clamps diagonally opposite each other on the cover and tighten the screws slightly. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 31 If the device is mounted carelessly, it may fall out of the installation cut-out or get damaged. Do not tilt the device. Secure the device against falling down until the tensioning clamps are attached. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 32: Connection
All connections and cables should be set up in a way that prevents interference and capacitive interference to the device. Make sure that the current and voltage resistance of the supply cables are sufficient. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 33: Connecting The Power Supply
Fig. 21: ET-Pro 4/7 power supply plug X1 ET-Pro 4/7 power supply plug X1 Des. Assignment L+ 24 V Power supply 24 V DC (-15%/+20%) max. 1.2 A – Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 34: Pro 10/15 Power Supply
M0 / GND The following counterparts have been tested for the SL-SMT 3.5 plug-in connector (Weidmüller), and may be used with the device: → BLZF 3.50/02/180 (F,LR,LH) SN Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 35: Data Connections
USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES 5.2. Data connections 5.2.1. Block diagram X100 Fig. 23: Block diagram of ET-Pro Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 36: Ethernet
LNK/RCV Yellow Link, Data Receive Flashing: connection active; data transfer in progress Off: no connection established SPEED Green On = 100 Mbit/s Off = 10 Mbit/s Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 37: Usb
Failures and malfunctions when connected directly to signal ground! Only use USB devices that do not have a direct connection between the signal ground and the hous- ing. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 38: Operation
Switching off The device is switched off when the system is switched off or the power supply is disconnected. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 39: Initial Start-Up Of The Network
Fig. 26: Startup page and network settings 2nd Press the ”Configuration” button. A page with further information appears. Fig. 27: Info page Press the ”Next” button. The device’s Network Settings page appears. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 40 Fig. 30: Changing the Lifeguard settings Change the lifeguard setting via the ”Change” button according to the version of the controller: CODESYS V2: “Berghof VNC LG” CODESYS V3: “Ping LG” Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 41: Web Terminal Configuration
15th Skip the following pages via the “Next” button until the page with the summary of the settings performed appears. 16th Press the “Save” button. The settings are saved and the device reboots automatically. After reboot, the device is in Web Terminal mode. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 42 22nd Press the “Save” button. The settings are saved and the device reboots automatically. After reboot, the integrated browser starts automatically after a few seconds and loads the set Visu-URL. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 43: Operation
While the Run/Stop light is flashing yellow: the device is in use and must not be switched off. During the boot process, the device does not give any warnings via the LEDs. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 44: Microsd Card
The operating life of the gold-plated contacts is up to 10,000 plugging and unplugging cycles. The microSD card drive has a push-in/push-out insertion and ejection mechanism. To avoid malfunction, the microSD card may not be removed by pulling. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 45: Troubleshooting
Make sure all the ventilation openings are kept free of obstructions Do not open the device. If it is necessary to work in the device, contact the Service department. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 46: Cleaning
Lysol, ethanol, isopropanol, acetone, methyl ethyl ketone, toluene, concentrated hydrochloric acid, pe- troleum, White spirit, petrol, engine oil, diesel, gear oil, brake fluid, anti-freeze, Hydraulic oil Condiments Lemon juice, tomato juice, mustard, tomato ketchup Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 47: Resistance Of The Front Membrane Display
Top Job, Jet Dry, Gumption, Fantastic, Formula 409, grape juice, milk, Ariel, Persil, Wisk, Lenor, Downey, Ajax, Vim, Domestos, Vortex, Windex Application of less than 1 hour Glacial acetic acid (pure acetic acid) Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 48: Disassembly
ET-Pro 6: 6 fastening clips (3 at the bottom, 3 at the top) Push the device sufficiently far out of the installation cut-out that the fastening clips are no longer engaged. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 49: Pro 10/15 Disassembly
Push the device evenly forwards out of the installation cut-out. 8.2. ET-Pro 10/15 disassembly Fig. 37: Loosening the screws Loosen the screws of the 8 tensioning clamps evenly. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 50 Fig. 38: Removing the tensioning clamps Remove the 8 tensioning clamps. Fig. 39: Pushing the device out of the installation cut-out Push the device evenly forwards out of the installation cut-out. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 51: Disposal
Make sure that the battery is completely discharged. Dispose of batteries at a recognised collection point in accordance with national laws and regula- tions. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 52: Technical Data
3 kg Operating conditions Ambient temperature 0°C to 55°C (front and rear side of device, in compliance with installation requirements) Relative humidity max. 85%, non-condensing Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... - Page 53 +24 V DC (-15% / +20%) SELV max. AC voltage component 5% Power consumption typ. 0.3 A, max. 1.2 A at +24 V DC Protection against reverse po- larity Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
- Page 54 Not available. Front membrane display (Autoflex) Use outdoors Like all polyester-based membranes, Autoflex is unsuitable for long-term exposure to direct sunlight. Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
-
Page 55: Type Plate
Date of manufacture (year/week) CE mark Supply voltage and maximum current Disposal information rating manufacturer’s ad- Manufacturer’s logo Manufacturer dress) QR code (identification no.) MAC addresses of device Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 56: Device Variants And Identification
Option code Option type S000-S999 Software options e.g. field buses H000-H999 Hardware options e.g. plug kit, certifications C000-C999 Customised options e.g. customised firmware, customised front membrane display Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 57: Standards And Certificates
→ RoHS Directive 2011/65/EU Applicable standards → Standard EN 50581:2012 → PLC standard EN 61131-2:2008-4 → Emission standard EN 61000-6-3:2012-11 → Safety provisions DIN EN 61010-2-201 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 58: Declaration Of Conformity
Products ➔ Controllers/PLC ➔ Display PLC ➔ Resistive ➔ Product A link to download the Declaration of Conformity can be found on the product page: Fig. 42: Download menu Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 59: Customer Services / Addresses
Ostendstraße 196 90482 Nuremberg, Germany info@ethercat.org www.ethercat.org Beuth Verlag GmbH, 10772 Berlin, Germany VDE-Verlag GmbH, 10625 Berlin, Germany VDE Verlag GmbH, 10625 Berlin, Germany Internet research: www.iec.ch Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx... -
Page 60: Appendix
→ → FreeType License (FTL) The source code for the free software can be requested from Berghof Customer Services at cost price within three years of delivery of the device. 12.2. List of figures Fig. 1: Overview of ET-Pro 4 (rear) ........................ 14 Fig. - Page 61 Fig. 39: Pushing the device out of the installation cut-out ................50 Fig. 40: Type plate ............................55 Fig. 41: Options label ............................. 57 Fig. 42: Download menu ..........................58 Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx...
Need help?
Do you have a question about the B-PRIMIS ET-PRO Series and is the answer not in the manual?
Questions and answers