Customer Server - Radionode RN171WC User Manual

Customer
Server
Select 4.HTTP Destination Setup 4.HTTP Destination Setup to set up a customer or third-
party server.
A.Set HTTP Host URL [xxx.xxx.xxx.xxx] A.Set HTTP Host URL [xxx.xxx.xxx.xxx]
Enter the IP address or domain of the server.
B.Set HTTP Host Port [80] B.Set HTTP Host Port [80]
Enter the port used by the server.
C.Set HTTP NMAC [0000xxxx0000xxxx] C.Set HTTP NMAC [0000xxxx0000xxxx]
Enter "0000" followed by the server's MAC address.
M AC a d d r e s s i s 1 2 d i g i t s b y d e f a u l t , b u t fo r
compatibility with Zigbee devices that use a 16-digit
MAC address, add "0000" in front of the original
address. Normal system does not require additional
setup.
D.Set HTTP DATAIN File(Get)[/test.jsp] D.Set HTTP DATAIN File(Get)[/test.jsp]
Enter the URL of the server program for data-in request
processing. Entering "0" disables this request function.
E.Set HTTP TIMESTAMP File(Get) [/0] E.Set HTTP TIMESTAMP File(Get) [/0]
If you are to use a GET-method HTTP request, enter the URL of
the server program that processes timestamp requests. If you are
using a POST-method HTTP request, enter the URL of the server
program that processes check-in requests. Entering "0" disables
this request function.
F.Set HTTP BACKUP File(Get) [/0] F.Set HTTP BACKUP File(Get) [/0]
If you are to use a GET-method HTTP request, enter the URL of
the server program that processes backup-in requests. If you
are using a POST-method HTTP request, enter "0" to disable this
feature.
For more information, see
30 and see HTTP Radionode Protocol V2
12
HTTP Radionode Protocol V1
on page 34.
on page