10
Image has slanted
sides
11
Image is reversed
12
The projector
cannot turn on
Problems with the Projector
#
Condition
1
The projector stops responding
to all controls
OSD Messages
#
Condition
1
Message
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
•
Select "Settings" from the home screen to open the
OSD menu. Go to "Projector" > "Projector Settings"
>"Keystone" > to make adjustments.
•
Select "Settings" from the home screen to open the
OSD menu. Go to "Projector" > "Projector Settings"
> "Projection Mode" > to adjust the projection
direction.
•
Plug in the power adaptor and try again.
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
Message Reminder
Fan fail - the system fan is not working.
Projector Overheat - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it is used..
Solution
29