Onscreen Display (OSD) Menus (for PV11a/
MV110/SP101/SH100)
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, use
screen.
Press
(ENTER) to enact it
•
•
When the OSD is displayed, use
press
(ENTER) to enter the submenus.
/
/
/
•
Use
press
(ENTER) to enter the next level.
•
Adjust the settings by using
•
Select the next item to be adjusted and adjust as described above.
•
Press
(BACK) to go back to previous page.
•
To exit the OSD menu, press
repeatedly or press
Note: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
Note: Functions vary depending on model definition.
/
/
/
.
/
/
select the desired item and
/
or
(BACK) on the projector or remote control
(HOME).
to select "Settings" in the home
/
to select the desired item and
press
(ENTER) enact it.
(ENTER)
.
13
Or