18
ASPECT RATIO
•
IMAGE
•
•
•
CONTROL
•
•
SOUND
•
EQ
This function allows you adjust the output of different
sound frequencies.
DISPLAY
•
ADVANCED
•
RESTORE DEFAULTS
Press "ENTER" after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
Aspect Ratio: Use this function to choose your desired
aspect ratio.
•
P2P: The image will be projected in its original
resolution.
•
Just Scan: The image will be scaled to fit the whole
screen.
•
16:9: The image will be scaled to fit the screen
anddisplayed using a 16:9 ratio.
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
Digital Zoom: You can shrink the image by using
.
Horizontal Scale: You can narrow the image width by
using
/
.
Vertical Scale: You can reduce the image height by
using
/
.
Sound Mode: There are several factory-preset sound
modes optimized for different audio categories.
Treble: Adjusts treble level.
Bass: Adjusts bass level.
Projection Mode
•
Front: The factory default setting.
•
Ceiling Front: Turns the image upside down for ceiling-
mounted projection.
•
Rear: reverses the image so you can project from behind
a translucent screen.
•
Ceiling Rear: turns the image upside down for ceiling-
mounted projection from behind a translucent screen.
AUTO Rotate: The projector can automatically rotates
the projected image when the projector is placed
upside down.
/