AOpen PV11a Series User Manual page 24

14
Wi-Fi
Wireless Network
Settings
Bluetooth
Bluetooth
System
System Settings
Projector
Projector Settings
Wi-Fi
• Wi-Fi: You can highlight Wi-Fi and press ENTER to
enable the Wi-Fi connection.
• Add network: After the Wi-Fi function is enabled,
choose a network to join.
Refresh
• Bluetooth: Turns the function on and off.
Rename this device
You can rename the projector.
Show received files
Bluetooth received: Displays the received files transferred
to the projector from Android devices.
Application management
You can force stop or clear data of the applications here.
Language input
You can set a language for the OSD menus and adjust the
input method settings.
Date&&Time
The projector can automatically adjust the date and time
according to your selected time zome when connected to
the internet. To adjust the date, time, or time zome
manually, set "Automatic date & time for slected time
zone" off first. You can also decide if you want to use 24
hour format.
Recovery
Returns the all settings to the factory default settings.
Keystone
• AUTO Vertical Keystone
• AUTO: The projector can automatically adjust image
distortion caused by tilting projection. When "AUTO" is
selected, "Sensor Calibration" is available. Make sure
that the projector is placed on a horizontal surface when
executing sensor calibration.
• Manual: You can manually adjust image distortion
caused by tilting projection using
"Keystone".
• OFF: You can manually adjust the shape and size of an
image that is unevenly rectangular on all sides after
enacting "4 Corner Correction", or manually adjust
image distortion caused by tilting projection vertically or
horizontally after enacting "H./V. Keystone".
/
after selecting