HoMedics BKP-100 Instruction Manual And Warranty Information page 4

5 Motor Back Massager
Targeted
Massage Buttons
Zone buttons activate
motors to massage specific
areas: upper back, lower
back and seat. Customize
your massage by choosing
one specific area, any
combination of areas, or all
three at once. To select a
massage area, simply slide
the button to the right and
the corresponding L.E.D.
light will illuminate. To
deselect, simply slide the
button to the far left and the
corresponding L.E.D. light
will turn off.
Power Adaptors
This massager is powered
by a custom 120 volt AC
home adaptor, and 12 volt
DC auto adaptor (cigarette
lighter plug-in style). Both
are included with your unit.
NOTE:
When selecting
the heat feature with
massaging action, there
will be a slight decrease
in the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
6
5 Massage
Motors
On/Off
Before connecting power
source, be sure the controls are
in the far left position. Select L
or H to activate the massage
and select a zone to begin the
massage function. To choose
the intensity of your massage, Soothing
Heat
adjust the strength from L to H.
To turn the power off, slide the
switch to the far left position,
the LED light will turn off.
Heat
Soothing, penetrating heat is
activated by pressing this
button. To turn off heat, simply
press the button again. The
glowing L.E.D. light indicates
that heat is on.
PLEASE NOTE:
The heat
option will only work while a
massage feature is selected.
Pressure
Activated
Switch
7