4. Connect the supply hose of the hydraulic brake master
cylinder.
5. Connect the transmission oil cooler pipes (1) and (2).
6. Install the transmission shaft flange, if installed.
Tighten the M24 nut (if installed) to 294 N·m (217 lb ft).
Tighten the M12 bolt (if installed) to 80 N·m (59 lb ft) .
7. Install the drive shaft and then the metal guard.
8. Connect the differential lock supply hose (1).
Engine - Engine and crankcase
47770506A 15/02/2017
10.1 [10.001] / 4
4
BAIS06CCM085AVA
5
BAIS06CCM032AVA
6
BSD1917A
7
BVE0282A