Download Print this page

Advertisement

Quick Links

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product. Please have this user manual well-reserved
for future reference.
Caution
Please consu lt the professionals before installation or repairing. The company takes no liabilities for any damage or
injuries that occur during the installation of the pipes, floor, wall and tub.
Before Installation
Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.
Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving
the factory. 
Shut off the main water supply before the installation.
Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to
the left and the cold water pipe to the right.
Check for leaks and make sure every joint is safely sealed after the installation, 
Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it
into use.
USER MANUAL
Two Handle Widespread Bathroom Faucet
SKU:H200020
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the H200020 and is the answer not in the manual?

Questions and answers

Summary of Contents for hernest H200020

  • Page 1 SKU:H200020 USER MANUAL Two Handle Widespread Bathroom Faucet Thank you for shopping with Hernest, please read this user manual thoroughly for your full under- standing, installing, and application of the product. Please have this user manual well-reserved for future reference.
  • Page 2 Tools you will need Note Read install information refer to Components List thoroughly for part names 2.8” The inlet pipe must not be overly bent The inlet pipe must not be overly twisted Max 30mm(1.2”) COLD Maximum thickness for sink or counter- Handle with the hot label should be top is 13/16'' or 30mm installed in the left hole...
  • Page 3 Installation Steps please flush the water pipe for at least 2 put faucet body and spout through minutes before installation to ensure reserved holes, adjust direction of faucet that no impurities interferes, and and spout. Install spout lock screw③ supplies hot and cold water from angle and gasket④...
  • Page 4 If you have any issues with the product, please feel free to contact us online or by phone for customer service. Phone No.: (909) 430-1666 Service E-mail: service@hernest.com For more detail information, please check out www.hernest.com It will be our pleasure to have your visit. www.hernest.com...