Advertisement

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product. Please have this user manual well-reserved
for future reference.
Caution
Please consult the professionals before installation or repairing. The company takes no liabilities for any damage or
injuries that occur during the installation of the pipes, floor, wall and tub.
Before Installation
Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.
Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving
the factory. 
Shut off the main water supply before the installation.
Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to
the left and the cold water pipe to the right.
Check for leaks and make sure every joint is safely sealed after the installation, 
Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it
into use.
USER MANUAL
Modern Kitchen Pull-down Deck Mount Faucet
SKU:H200202
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H200202 and is the answer not in the manual?

Questions and answers

Summary of Contents for hernest H200202

  • Page 1 USER MANUAL Modern Kitchen Pull-down Deck Mount Faucet Thank you for shopping with Hernest, please read this user manual thoroughly for your full under- standing, installing, and application of the product. Please have this user manual well-reserved for future reference.
  • Page 2: Installation Instruction

    Installation Instruction Philips Screwdriver Adjustable Wrench Hexagon Wrench Part list Part Name Threaded pipe Rubber washer Metal washer Mounting nut Faucet body Waterlines Hose Weight ball Adapter Mounting screws Screws...
  • Page 3: Installation Steps

    Installation Steps Remove the mounting nut(D), metal Install rubber washer(B), metal washer(C), washer(C) and rubber washer(B) and mounting nut (D) back to the thread- from the threaded pipe(A). Insert ed pipe(A). Adjust the faucet body(E) threaded pipe(A) through the hole of correctly and screw with mounting the countertop.
  • Page 4: Troubleshooting

    Remove spray head and turn the faucet on Connect waterlines(F) to angle stops. for 1 minute to flush any debris. Turn on the angle stops and check for leakage(DO NOT TURN FAUCET ON) Troubleshooting Problem Possible cause Solution Water does not shut 1.
  • Page 5: After-Sale Service

    If you have any issues with the product, please feel free to contact us online or by phone for customer service. Phone No.: (909) 430-1666 Service E-mail: service@hernest.com For more detail information, please check out www.hernest.com It will be our pleasure to have your visit. www.hernest.com...

Table of Contents