Advertisement

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product. Please have this user manual well-reserved
for future reference.

Caution

Please consu lt the professionals before installation or repairing. The company takes no liabilities for any damage or
injuries that occur during the installation of the pipes, floor, wall and tub.

Before Installation

Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.
Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving
the factory. 
Shut off the main water supply before the installation.
Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to
the left and the cold water pipe to the right.
Check for leaks and make sure every joint is safely sealed after the installation, 
Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it
into use.
USER MANUAL
Wall Mounted Bathtub Shower Set
SKU:H200056
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H200056 and is the answer not in the manual?

Questions and answers

Summary of Contents for hernest H200056

  • Page 1 SKU:H200056 USER MANUAL Wall Mounted Bathtub Shower Set Thank you for shopping with Hernest, please read this user manual thoroughly for your full under- standing, installing, and application of the product. Please have this user manual well-reserved for future reference.
  • Page 2 Specifications 20mm(0.8") 55mm(2.2”) 223mm(9.1") 121mm(4.9") Cold 65mm(Φ2.7") NOTE:THIS FAUCET IS DESIGNED FOR WALL MOUNTED ROUGH-IN INSTALLATION...
  • Page 3 Tools You will need Adjustable Wrench Hexagon Wrench Philips Screwdriver Teflon Tape Installation Steps Outlet1 Adjustable Hot water inlet Cold water inlet The recommended distance is 55mm(2.2”) Outlet2 Fix the shower valve(A)into the wall, Use Wrap Teflon tape around the pipe a level to ensure that the valve is straight threads and connect hot and cold water and level.
  • Page 4 If you have any issues with the product, please feel free to contact us online or by phone for customer service. Phone No.: (909) 430-1666 Service E-mail: service@hernest.com For more detail information, please check out www.hernest.com It will be our pleasure to have your visit. www.hernest.com...

Table of Contents