Advertisement
Step 21
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D14 and D15).
å
Fasten the EXTENSION SLIDES (35MC) to the DRAWER SIDES (D14 and D15). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten the PULL (189K) to the DRAWER FRONT (N). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
2
3
189K
BLACK 9/16" LARGE HEAD SCREW
(2 used for the PULL)
Open end
1
N
1S
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
10A
D15
D14
3S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
1
2
3
Drawer Slide
Center the screw in the oval hole.
Open end
Page 25
Advertisement
