Advertisement
Gimbal Mount Setup
Insert Rubber Spacer Set into the inner collar,
then tighten it with the help of provided Allen
key.
The outer collar comes with already attached
180
degree
Attach the outer collar outside the inner collar
as shown in the image.
For your convenience, hold the collar with
your hand properly, match the holes, tighten
them with the provided Allen bolts using an
Allen key.
Attach the gimbal handle to the collar via two
holes present on the collar sides and secure it
with the help of knobs.
Loosen the knobs present on the weight
platform, Insert the weight rod into each hole,
and re-tighten the knobs to secure it.
Insert the threaded weights into the holes
present on the weight rods. Using the same
approach, you can attach the remaining
weights to the already attached ones accord-
ing to your camera balancing.
rotatable
shanks.
2
Advertisement
