Table of Contents
Advertisement
Quick Links
OUTDOOR POTTING BENCH
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
HELPFUL HINT
This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.
LY478
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
Assemble components on a soft, clean surface to avoid damaging the finish.
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children away
during assembly.
/
/
Order/Customer Reference Number:
LAM-622
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
No.
A
B
C
D
E
F
G
07/2020
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
2-PERSON
RECOMMENDED
Parts
Work Surface
Bottom Shelf
Top Shelf
Leg
Shelf Support
JCBC M6 x 40mm
Hex Key
Qty.
1
1
1
4
2
14
1
Page 1 / 3
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor LAM-622
Summary of Contents for Sunnydaze Decor LAM-622
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 ASSEMBLY Do not fully tighten any bolt until all bolts have been placed. STEP 1 1. Align the holes of 4x Leg (D) with Bottom Shelf (B) and loosely fasten using 4x JCBC M6 x 40mm Bolt (F). 2. Attach Work Surface (A) to 4x Leg (D) by hand-tightening 4x JCBC M6 x 40mm Bolt (F).
- Page 3 STEP 3 1. Place Top Shelf (C) onto the shelf supports. 2. Secure Top Shelf (C) with 2x JCBC M6 x 40mm Bolt (F). STEP 4 ( NOT SHOWN ) 1. Gently tighten all bolts using Hex Key (G). USE & CARE SAFE USE: Only use on a flat, level surface.
Need help?
Do you have a question about the LAM-622 and is the answer not in the manual?
Questions and answers