Advertisement
Table of Contents
OUTDOOR COFFEE TABLE WITH SHELF
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
No.
A
B
C
D
E
F
G
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or
indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
LY508
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
Assemble components on a soft, clean surface to avoid damaging the finish.
Parts
Table Top
Shelf
End Panel
JCBC 60mm Bolt
Barrel Nut
Hex Key
Barrel Nut Driver
/
/
Order/Customer Reference Number:
LAM-443
Qty.
1
1
65
pounds
2
29.5 kg
Weight Capacity
NOTE: Over time, the bolts may become loose.
8
Save the included tools for tightening loosened hardware.
8
1
CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
1
01/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
WARNING
Page 1 / 2
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor LAM-443
Summary of Contents for Sunnydaze Decor LAM-443
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 ASSEMBLY NOTE: Do not fully tighten hardware until all components have been loosely assembled. 1. Lay Table Top (A) and Shelf (B) face-down on a clean, soft surface. 2. With the slotted end facing upward, place four Barrel Nut (E) into the underside of the table top. Use Barrel Nut Driver (G) to turn the barrel nut so the threaded hole aligns with the pre-drilled hole.
Need help?
Do you have a question about the LAM-443 and is the answer not in the manual?
Questions and answers