GATHERING BIRDS CERAMIC OUTDOOR
WATER FOUNTAIN WITH LED LIGHTS
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Parts
Decorative Birds
Topper with LED Light Ring
Basin Bowl
Electric Submersible Pump
AC Adapter
Leak Guard
***Shim (optional)
ASSEMBLY
1. Place the basin bowl onto the pedestal and turn clockwise to lock it in place.
2. Run the long cable on the electric submersible pump through the tube in the basin bowl and pedestal. Make sure the
power cable is underneath the groove in the bottom of the pedestal.
3. Connect the shorter cable on the pump to the light cable on the bottom of the topper.
4. Firmly connect the water tube from the topper to the electric submersible pump.
5. Place the leak guard over the basin tube.
6. Gently place the topper onto the basin bowl.
7. Place the decorative birds on the topper.
8. Firmly connect the pump power cable to the AC adapter.
9. Fill the fountain with enough water to keep the pump fully submerged during operation, approximately 1 gallon.
10. Plug the power cord into a properly grounded GFCI outlet.
Note: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
You may need to add more water as the pump begins to circulate water through the fountain.
MZ15447BA
Purchase Date:
/
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
SSS-697
Select a smooth, level surface to place the fountain.
Qty.
3
Inspect packaging to ensure all
1
parts are accounted for before
disposing of packing materials.
1
1
1
NOTE:
The water tubing is built into the fountain. Take care when handling the water tube;
1
detaching the water tube from the fountain will damage the fountain and void the product warranty.
3
07/2021
/
Order/Customer Reference Number:
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 2
Need help?
Do you have a question about the SSS-697 and is the answer not in the manual?
Questions and answers