Meaning of the letter code: THS Sensor Temperature and Humidity Sensor. 52 or 40 Enclosure protection rating, IP 52 / IP 40. 12DC/24DC/PoE Power supply voltage. RS485/LAN/PoE Communication interface. 3. Technical Specifications – LED Display The large-size LED display consists of super-bright single color (version R) or multi-color (version RG) 7-segment LED modules with 100 mm digit height and 120°...
4. Technical Specifications – Temperature / Humidity Sensor The measurements of air temperature and humidity are performed by a high-accuracy and precision digital sensor. The sensor device can be internal plug-in type (version THS) or external wired (version TH). Sensor Parameters Sensirion SHT31-DIS Sensor type -40°C to +80°C...
Page 6
Internal Plug-in Sensor Connection (NDA…THS version) If your display delivery includes internal plug-in temperature and humidity sensor (NDA…THS version) insert the sensor device into the opening hole in the bottom side of display frame. To ensure proper electrical connection the connector of the sensor must be inserted all the way in. The connector type is 3,5 mm Jack.
Page 7
LAN Interface Connector – P9 Ethernet 10/100 RJ45 shielded connector is used. Connector view Signal Direction output Connector RJ45 view to hole output input pin 1 NC (LAN), +Vdc (PoE) pin 2 pin 3 NC (LAN), +Vdc (PoE) pin 4 pin 5 input pin 6...
External sensor cable connector LAN cable (optional) RJ45 6. Internet Web Browser Connection Reading Measured Values Display has a programmed web server. This feature allows remote connection with display using a standard PC based Internet web browser (Internet Explorer, Mozilla Firefox, etc. ) Simply enter the numeric IP address of display into browser’s URL field (For example: “192.168.0.69”).
You can view more displays at the same time by opening several tabs on your browser and entering their corresponding IP addresses into each tab’s URL field. Configuring Display When connected with display via its IP address in the web browser, you can enter the Administrator menu. This can be done by entering the Password in top right field of the browser window.
Page 12
TEMPERATURE Displays temperature value currently on display. Offset -9,9°C to +9,9°C Allows user to implement offset correction to measured values from -9,9°C to +9,9°C. Default value is 0. Please be cautious when using this feature because sensors are already calibrated from factory. Under normal circum-stances there should be no need to change it.
Page 13
Color temperature On/Off, special feature used with color LEDs. Display’s LED color will change automatically in dependence on displayed temperature value. T (RH) UPPER LIMIT COLOR TEMPERATURE LOWER LIMIT GREEN Number of color levels (1 to 100) Sets the number of color levels during transition from lower limit (green) to upper limit (red) and wise versa when color temperature function is ON.
Display settings Display mode Sensor No. 1 / Sensor No. 2 / Average from 2 sensors Sensor No. 1 Display will show measured value from sensor No. 1 as configured above. Sensor No. 2 Display will show measured value from sensor No. 2 as configured above. Average from 2 sensors Display will show average value from 2 sensors, if two sensors are connected.
Page 15
Subnet mask Shows factory default Subnet mask of connected display. Enter new Subnet mask according to your LAN. Gateway address Shows factory default Gateway address of connected display. Enter new Gateway address according to your LAN. TCP/IP port for MODBUS Shows MODBUS TCP/IP port.
Page 16
Sensor No. 1 Function 3, 4 Function number, which is used for reading temperature and humidity values. Default: 4. (Default for ELEN sensors.) Sensor No. 1 Register address for temperature 0 to 65535 Address of register, which contains temperature value.
Sensor No. 1 Function 3, 4 Function number, which is used for reading temperature and humidity values. Default: 4. (Default for ELEN sensors.) Sensor No. 2 Register address for temperature 0 to 65535 Address of register, which contains temperature value.
EC DECLARATION OF CONFORMITY No. 19102107 / No. 19102108 Manufacturer: ELEN, s.r.o. Lubochnianska 16 080 06 Lubotice Slovak Republic The undersigned, representing the manufacturer above herewith declares that the following products are in conformance with the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU and RoHS Directive 2011/65/EU and are CE marked accordingly.