Connecting To An Amplifier Equipped With A Dolby Pro Logic Surround; Rechargeable Battery Pack - Coby TFDVD7752 Instruction Manual

Connecting to an amplifier equipped with a Dolby Pro Logic Surround

Rechargeable Battery Pack

• For new or exhausted rechargeable battery pack, we recommend it be recharged for 4 hours.
• To charge the battery, just connect the AC adaptor.
• If the battery does not work to your expectation, please consult the COBY service center.Do not attempt to
replace or repair the battery by yourself unless your are a qualified service personnel
TF-DVD7751
(NI-MH Rechargeable Battery Pack)
• The battery can be recharged about 300 times without obvious performance drop.
Note:
• Use the special charger.
• Never dispose of in fire or heat up.
• Do not use in high temperature or near heat sources.
• Do not open the cover. Refer servicing only to qualified service personnel.
• Do not charge up the battery pack while the DVD player is working with the battery pack.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Low Battery Detection
• The unit will access to STANDBY mode automatically when the battery is low.
CONNECTIONS CONNECTIONS
To Coaxial Out
Amplifier equipped with a
DolbyPro Logic Surround
Coaxial cable (not supplied)
When connecting the equipment to a receiver equipped
with Dolby Digital, refer to the owner's manual.
To Coaxial Input
17