Nailor IOM - BACnet UNI2-VAV Assembly page 3

Button Navigation Guide:
- Enters Advanced Menu, when held for 5 sec
Advanced
- Navigates between parameters
Menu
- Submits a modified parameter
- Goes up one level, when held for 5 sec
- Cancels a modified parameter, when held for 5 sec
Screen timeout: 30 sec
The TBN hardware information appears on the display.
Screen timeout: 30 sec
The TBN's hardware information may be required by Nailor
Technical Support for troubleshooting purposes.
How to adjust the screen contrast
1. Navigate to the contrast parameter.
2. Use the arrow keys to adjust the screen contrast.
Screen timeout: 30 sec
The Contrast parameter ranges from 0 to 100, where smaller
values give a dimmer contrast than larger ones.
3. Press the Menu button to submit the new contrast level.
Screen timeout: 30 sec
The screen contrast changes according to the new value
submitted.
Date: 12-2021 Supersedes: NEW
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
TBN BACnet Thermostat • Network Configuration
OR
- Modifies a parameter
- Goes up one level when pressed in Exit screen
- Releases an override when both are pressed
- Enters into a submenu
How to exit the General Configuration submenu
To exit the General Configuration submenu and go up one level,
do one of the following:
1. Press the Menu button several times until the Exit screen
appears. Then press either of the arrow keys.
Screen timeout: 30 sec
2. Press and hold the Menu button for 5 seconds.
Page 3 of 6
and
OR
IOM-TBN