Volume Control; Pairing Your Wrsm - Motorola PMMN4095 User Manual

Volume Control

To increase the volume, push volume lever towards the
the volume, push lever towards the
To mute, hold lever to the for 2 seconds. To unmute, push lever to
the or press the PTT button. Volume returns to the previous level.
Volume
Toggle
Audio Indicator
Figure 2 9: Volume Control
The color of the Audio Indicator LED changes according to Table 2.3 .
. To decrease
.

Pairing Your WRSM

Procedure:
1
Ensure both the radio and WRSM are powered on.
2
Place the blue dot (secure pairing spot) on the WRSM within one
inch of the blue dot (secure pairing spot) on the Mobile Mic
Gateway. Refer to Figure 2.10.
3
During pairing, the Audio Indicator LED blinks according to the
pairing status. Refer to Table 2.5 for pairing indicators.
Table 2.5: Pairing LED, Tone Indication and Voice Prompt
Audio Indication
State
LED
Not Paired Off
Paired
LED illuminated
Successfully
Wireless Link
Connected with LED Heartbeat Connected tone
Host
Wireless Link
Disconnected LED illuminated
from Host
NOTE:
* You will hear Disconnected tone every 2 minutes after the
WRSM prompts "Disconnected".
Tone
Voice Prompt
Indication
"Touch blue dots
Pairing Ready
together to
tone every
connect" every
2 minutes
2 minutes
Pairing
"Connecting"
Successful tone
"Connected"
Disconnected
tone every "Disconnected" *
2 minutes
English
9