Table of Contents
Advertisement
Maintenance
When replacing filters use only Intellipure certified filters. Intellipure filters are
designed for high voltage operation. Use of non-Intellipure filters can be hazardous
to personnel and equipment voiding the warranty.
PREFILTER REPLACEMENT
Lock the (2) front wheels to secure the unit. (fig-1)
Remove the filter access door by unlocking four quarter turn latches. (fig-2).
Filter access door removal may require a firm pull to release.
Slide Prefilter out of the filter channel (fig-3).
To install a new Prefilter, slide the new Prefilter into the channel in accordance with the direction of the air flow label. (fig-3)
Ensure the Prefilter is firmly seated, unit will not turn on without installing Prefilter correctly.
Return the filter access door to the unit, (fig-4 and fig-10) threaded pin shall be positioned into the hole of the control panel to
activate safety switch. The unit will not operate without safety switch activated.
Intellipure © 2021 All rights reserved.
Fig-1
Fig-3
Fig-2
Fig-4
10
Advertisement
Table of Contents
Need help?
Do you have a question about the 950P and is the answer not in the manual?