Table of Contents
Advertisement
Disassembly
1 Grasp the Food Chute and turn
counter clockwise and lift straight
up (Figure 8).
2 Remove the Storage Bowl Lid from
the Storage Bowl by lifting straight
up (Figure 9).
3 With one hand on the Storage Bowl
Lid turn the Disc from underneath
the Storage Bowl Lid counter
clockwise and then push up (Figure
10 & 11).
Caution: Blades are sharp, DO NOT
insert fingers inside the Discs.
2
1
Figure 10
Figure 8
Figure 9
2
1
Figure 11
10
Storage
1 Place the Motor Housing
inside the recessed circle
inside the Storage Bowl.
Allow cord to drape out of
the Storage Bowl so that
the remaining pieces can be
placed in.
2 Place one Flat Disc in the
bottom of the Storage Bowl.
3 Place the Cone Disc inverted
on top of the Flat Disc.
4 Place the Food Chute over
the inverted Cone Disc.
5 Place the Food Grip in the
Food Chute.
6 Place the Cleaning Brush
inside the Storage Bowl.
7 Place the balance of the cord
inside the Storage Bowl.
8 Place the second flat Disc inside the Storage Bowl Lid as described
in Step 2 on page 7 then place Storage Lid Cover on top and turn
clockwise until it clicks into place.
Care & Cleaning
CAUTION: Blades are very sharp; handle with extreme care.
The cutting edge of the blade is on the interior of the Discs. Always use
the included Cleaning Brush to clean the Discs and blades, never place
fingers in the interior part of the discs.
Never immerse Motor Housing in water or any other liquid. Wipe with a
damp cloth and dry thoroughly.
Do not place any parts of the Spiralizer in the dishwasher. Hand wash the
following parts in warm soapy water and dry thoroughly:
•
Food Grip (Use Cleaning Brush provided to clean this part)
•
Discs (Use Cleaning Brush provided to clean these parts)
•
Food Chute
•
Storage Lid Cover
•
Storage Bowl Lid
•
Storage Bowl
Figure 12
11
Advertisement
Table of Contents
