Wolfgang Puck BSPL0010 Use And Care Manual page 5

Assembling & Processing (Cont.)
4 Place a single piece of food into
the food chute. For best results,
cut food to be no longer than
food chute's height and no more
than 2.5 inches wide. Both ends
of food should be cut flat to
allow the Food Grip to rotate the
food. Place food in the center of
the blade, press until it holds in
place (Figure 4).
5 Attach the Food Grip to the
bottom of the Motor Housing
(Figure 5). Make sure the Food
Grip pierces the food before
pressing down into the Food
Chute (Figure 7).
6 Slide assembled Motor Housing/
Food Grip into Food Chute by
aligning the ribs of the Motor
Housing with the notches in the
Food Chute (Figure 6).
Figure 5
Figure 4
Ribs
Figure 6
8
Assembling & Processing (Cont.)
7 Plug the Motor Housing into
the wall outlet. Keep one hand
on the Motor Housing and the
other on the Storage Bowl Lid
then depress and hold the Power
Button in. Apply light steady
downward pressure until food
is processed and the Motor
Housing reached a stopping
point. Release the Power Button
to stop.
Figure 7
9