How To Use - Prodigy P500 Owner's Manual

HOW TO USE

1. Sit on the seat
•
Skin contact is required to activate the seat sensor
2. Seat temperature
•
Press the seat temperature button on the remote or main body controls
to cycle between preset temperatures. (93.2°F, 98.6°F, 104°F)
3. Flush the toilet
•
Stand up to activate th auto flush, or press the desired flush button on
the remote or main body controls.
10
4. Night light
•
Press the night light button on the remote or main body controls to turn
the light on or off.
Notice: The Flush button cannot be used continuously.
Wait about 10 seconds for next flush
5. Manual Flushing
Use the manual flush buttons during a power outage.
•
Press the Bowl button for 3 seconds.
•
Press the Jet button for 5 seconds.
•
Press the Bowl Flush button again for 3 seconds.
Bowl
Jet
•
The Bowl button
circulates water around
the toilet bowl.
•
The Jet button flushes
debris away.
11