Advertisement
PREPARATION
1.
Place the batteries into the remote control.
•
Open the battery cover on the back.
•
Put the 3 AA batteries in the proper position.
•
Close the cover.
Battery Tips
•
Use the same battery type when replacing old batteries.
•
Remove the batteries when the product will not be used for an extended
period of time.
•
Settings may be initialized after replacing batteries. Configure the
settings again.
2.
Plug in the power cord
Notice:
Turn off the power on the main body when replacing batteries or
cleaning the product.
8
3.
Adjust the water flow with the shutoff valve.
•
If the water pressure is too high, water may splash or overflow when
flushing. Reduce the water pressure by turning the water shutoff valve.
4.
Check the display panel
•
Is the power indicator on? If not, press the button to turn on the product.
•
Is the seat indicator on? If not, press the seat temp button to activate the
heated seat.
9
Advertisement
