nbf NEX Series Assembly Instructions

PARTS
–
remove all the parts from the carton and verify part quantities as indicated on this parts list.
STEP 1
Fasten the RIGHT AND LEFT ARMS
CHAIR BODY using the ALLEN WRENCH
1
and both LONG
3
SHORT BOLTS. (short bolts at the top, long
4
bolts at the bottom).
SHORT BOLT
LONG BOLT
TIP: Do not tighten bolts one at a time. Instead, tighten each a little, alternating a few turns at a time until all are tight..
Congratulations on the purchase of your new Signature Series chairs!
1
CHAIR BODY
QTY: 1
2
SET OF RIGHT
AND LEFT
ARMS
3
LONG BOLTS
QTY: 4
(2 per chair)
to the
2
5
and
CUSTOMER SERVICE HOTLINE
N e s t i n g w A r m s C h a i r – A s s e m b l y
4
5
6
STEP 2
Once all bolts are tight, insert BOLT COVERS
over the bottom bolts in the arms.
BOLT COVER
800-626-6060
N E X C O L L E C T I O N
SHORT BOLTS
QTY: 4
(2 per chair)
ALLEN WRENCH
QTY: 1
BOLT COVERS
QTY: 4
(2 per chair)
6
BOLT COVER
51593-94, 51478