Advertisement
Quick Links
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
HD-B
HD-E
Parts :
HD-A: Back Panel
(69" x 31" x 1")
Quantity: 1
HD-F: Right Side
HD-E: Left Side
(15" x 31" x 1")
(15" x 31" x 1")
Quantity: 1
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
4-door Hutch • INSTRUCTIONS
CARTONS: HD71
800-558-1010
www.NBF.com
HD-B: Sliding Door
(17.25" x 12.75" x 1")
Quantity: 4
HD-G: Top
(71" x 15" x 1")
Quantity: 1
HD-H: Base
(69" x 14" x 1")
Quantity: 1
Any problems or questions call Regency Office Furniture at 1-866-816-9822
HD-C
HD-A
HD-C: Divider
(14" x 13" x 1")
(14" x 13" x 1")
Quantity: 1
HD-G
HD-D
HD-D: Foot Bracket
(15"D)
Quantity: 2
Figure 1:
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
4-door Hutch
Page 1
HD-H
HD-F
Advertisement
Related Manuals for nbf Signature Series
Summary of Contents for nbf Signature Series
- Page 1 4-door Hutch Page 1 4-door Hutch • INSTRUCTIONS CARTONS: HD71 800-558-1010 Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet. HD-G HD-C www.NBF.com HD-B HD-H HD-F HD-E HD-D HD-A Parts : HD-C: Divider...
- Page 2 Page 2 4-door Hutch • INSTRUCTIONS CARTONS: HD71 800-558-1010 Hardware : I: 3” Screw/Washers J: Allen Key K: Wood Cam Pins www.NBF.com (76mm) Quantity: 4 Quantity: 17 Quantity: 1 N: Double Sided L: Handles M: Handle Screws O: Cam Covers...
- Page 3 CARTONS: HD71 800-558-1010 STEP 5: Insert 4 Wood Cam Pins(K) into the Left Side(HD-E) STEP 6 : Connect Left Side(HD-E) and Right Side(HD-F) to www.NBF.com and Right Side(HD-F). the Back Panel(HD-A) and Base(HD-H) by inserting and locking cams (Figure 1).
- Page 4 STEP 9 : Attach Foot Bracket(HD-D) to the Left Side(HD-E) STEP 10 : Attach 1 Handle(L) to each Sliding Door(HD-B) with www.NBF.com by using 2 Screw/Washers(I). Repeat this step for the Right 2 Handle Screws(M). Repeat this step for all doors.