Advertisement
INSTALLATION
1
Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
2
Secure the mounting bracket to the mounting surface using the screws and anchors included. Use the mounting pad
between the bracket's arm and mounting surface as needed.
3
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
with the camera.
NOTE:
Do not touch the lens when handling the camera.
4
Pass wires through the mounting bracket and make all necessary connections with the camera.
5
Secure the camera's junction box to the mounting bracket using the included camera mounting screws.
6
Adjust the camera's position and angle and complete the installation by placing the dome cover on the camera. Secure
the dome cover to the camera's base using the screws included with the camera. See the camera's QSG for
more information.
Camera module
Camera dome cover
Rev Date: 08/21
Ceiling mount
Quick Start Guide
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Advertisement
