Advertisement
Technical Specifications
Planning the 8776 Termination Unit Installation
2
Specifications
Size
Weight
Approvals
Safety Certifications
Power
Cables and Cable Guide
Physical Environment
Operating temperature
Storage temperature
Relative humidity
Shock and vibration
* Technical specifications are subject to change without notice.
Review the following list to help plan for the installation.
Obtain the applicable cables; refer to Cables You Need on page 3.
Make sure the Hotwire DSLAM chassis is installed and power is supplied to
the chassis.
After the Hotwire 8776 Termination Unit is installed, there are configuration
procedures that must be performed before you can begin to use the
termination unit. Refer to the Hotwire 8776 M/SDSL Termination Unit, with
G.703 Interface, User's Guide , for more detailed configuration procedures.
August 1998
Criteria*
Length 10 inches (25.4 cm)
Height
12.3 inches (31.1 cm)
Width
0.8 inch (2.0 cm)
Approximately 1.3 lbs. (0.6 kg)
Refer to the equipment's label for approvals on product.
The Hotwire Model 8776 Termination Unit contains a
DC-to-DC converter that requires – 48V power input. The
– 48V power is distributed through the Hotwire DSLAM
backplane.
Maximum Power Dissipation = 19 watts
Part Number
Description
8700-F1-500
Cable Guide for 8800 DSLAM
32 to 122 F (0 to 50 C)
– 4 F (–20 C) to 158 F (70 C)
5% to 85% (noncondensing)
Withstands normal shipping and handling.
8776-A2-GZ40-10
Advertisement
