Jenn-Air EDR3RXD1B Use & Care Manual page 8

Table of Contents

Advertisement

Available languages

Available languages

INTRODUCTION
2.
Turning Off Cooling
Press the FRIDGE or FREEZER touch pad.
NOTE:
Press and hold the COOLING OFF

touch pad for 3 seconds.
To turn off the power completely, use

the power ON/OFF switch located
behind the top grille. Refer "Power On/
Off Switch."
3.
Viewing the Temperature in
Degrees Celsius
Press °C touch pad. To redisplay degrees
Fahrenheit, press °F touch pad.
NOTE: If the freezer temperature is below
zero, the negative sign next to the freezer
display will light up. This is normal.
4.
Adjusting Controls
NOTE: Wait at least 24 hours between
adjustments. Recheck the temperatures before
other adjustments are made.
TO ADJUST SET POINT TEMPERATURES:
Press the FRIDGE or FREEZER touch pad,
and then press the Plus (+) or Minus (-)
touch pad until the desired temperature is
reached.
Press the SAVE touch pad to program the
desired temperature.
NOTE: The set point range for the freezer is -5°F
to 3°F (-21°C to -16°C). The set point range for
the refrigerator is 34°F to 42°F (1°C to 6°C).
8 | INTRODUCTION
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too
REFRIGERATOR
cold
Control 1° higher
Not set correctly for
conditions
REFRIGERATOR too
REFRIGERATOR
warm
Control 1° lower
High use or room very
warm
FREEZER too cold
FREEZER Control 1°
Not set correctly for
higher
conditions
FREEZER too warm/
FREEZER Control 1°
too little ice
lower
High use or heavy ice
use
5.
Max Ice
The Max Ice feature speeds up the ice
production rate to assist with periods of heavy
ice usage.
Press OPTIONS, and then press MAX ICE
to turn on the Max Ice feature. Max Ice
will remain activated for 24 hours unless
manually turned off.
NOTE: The temperature display for the
refrigerator and freezer compartments will
remain at the user's set points, but the actual
temperature of the freezer compartment will
drop to -5°F (-21°C), while the Max Ice feature is
enabled. After 24 hours, the freezer will return
to the previous temperature set point.
6.
Max Cool
The Max Cool feature assists with full grocery
loads, temporarily warm room temperatures, or
during heavy door opening use.
Press OPTIONS, and then press MAX COOL
to turn on the Max Cool feature. Max Cool
will remain activated for 24 hours unless
manually turned off.
NOTE: The temperature display for the
refrigerator compartment will remain at the
user's set point, but the actual temperature of
the Fridge compartment will drop to 34°F (1°C),
while the Max Cool feature is enabled. After 24
hours, the refrigerator returns to the previous
temperature set points.
7.
Sabbath Mode
Sabbath mode is designed for the traveler
or for those whose religious observances
require turning off the lights and ice maker.
By selecting this feature, the temperature set
points remain unchanged, the ice maker will
be disabled, the interior lights will turn off, and
the audio tones are muted. For most efficient
refrigerator operation, it is recommended
to exit Sabbath mode when it is no longer
required.
Press the SABBATH touch pad to turn on
Sabbath mode. This feature will remain on
until Sabbath is pressed again.
NOTE: If the Max Cool or Max Ice feature
has been selected prior to turning on
Sabbath mode, Max Cool and Max Ice will
be automatically canceled upon entering
Sabbath mode.
8.
Filter Reset
Refer "Water Filter Indicator" in the "Water
Filtration System" section.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edr3rxd1Kad3rxd1

Table of Contents