AirClean systems PowderSafe AC730C Operator's Manual page 11

CAUTION: Only use approved accessories with the
exterior connectors.
13) Make sure that any exterior linecord connections are secure and seated properly. These
connections are located on the back right side of the workstation. See figure 5.
14) Locate the power entry module on the right side of the workstation. Insert the female
end of the linecord into the power entry module and the male end into an appro-
prate electrical outlet. See figure 5.
Figure 5. AC730C/AC740C Linecord power entry module
730C side
11