Advertisement
Operation
Before you begin cleaning
IMPORTANT: Do not use hot or boiling water to fill clean water tank. Do not overfill the water tank.
NOTE: Always ensure there is water in the clean water tank.
Remove the clean water
tank.
a
Attaching the cleaning pad
WARNING: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
IMPORTANT: Never use the steam mop without the microfibre cleaning pad correctly attached to the
floor head.
Microfibre cleaning pad
Undo drawstring.
vax.co.uk
All manuals and user guides at all-guides.com
1
2
Twist the cap slightly
anti-clockwise to remove.
b
(dependant on model)
Remove microfibre cleaning pad.
NOTE:
Do not
over fill.
Fill the tank with max
500ml of water and replace
the water cap, Tighten by
twisting clockwise.
Orange LED
will illuminate when the unit is
a
switched on at the plug and water is heating.
Within approximately 1 minute the
b
also illuminate showing steam mop is ready to use.
The
Green LED
will go off when unit water is
re-heating.
Velcro microfibre cleaning pad
(dependant on model)
Hold corner of pad down with foot
and peel unit away
Replace the clean water
tank, clicking into place
making sure the hard water
filter is in place.
Green LED
will
5
Advertisement
